Nowaday, phones aren’t just a communication device. They are our life lines that help us with everything from keeping in touch with our loved ones, to ordering a pizza, to finding the best route to our next destination. Or even if you want to watch a movie together with your family.
However, there are still some things that phones can’t do as well as their larger cousins, like project an image onto a wall. That’s where a projector can come in handy. However, the cost of a projector can be prohibitive for some people. If you’re looking for an alternative way to project your phone’s screen onto a wall without spending a lot of money, there are a few different methods you can try.
In this article , we will explore a few different ways that you can project your mobile screen on the wall without using a projector.
Can we project mobile screen on wall without projector ?
The answer is yes . There are a few different ways that you can project your mobile screen on the wall without using a projector.
One way is to use a mirror. This will require you to position the mirror in such a way that it reflects the image from your phone onto the wall.
Another way is to use a piece of translucent paper or fabric. You will need to hold the paper or fabric up to the light from your phone so that the image is projected onto the wall.
You can also use a projector screen. These are usually made of a white fabric that is stretched over a frame. You can buy a projector screen or make your own by stretching a white bed sheet over a frame.
Whatever method you choose, you’ll need to make sure that your phone’s screen is large enough to be seen from a distance. You may also need to adjust the brightness of your screen so that the image is visible.
What do I need to prepare to project the mobile screen on the wall without projector ?
You will need a few things in order to project your mobile screen on the wall without a projector.
First, you’ll need a way to reflect or transmit the light from your phone. This can be done with a mirror, a piece of translucent paper or fabric, or a projector screen.
Second, you’ll need a way to hold the reflecting or transmitting material in front of your phone. This can be done with a frame, a stand, or by hand.
Third, you’ll need to adjust the brightness of your screen so that the image is visible. You can do this by going into your phone’s settings and increasing the brightness of your display.
Fourth, you need to find a wall that is big enough to project the image from your phone. The bigger the screen, the better.
Fifth, you’ll need to make sure that your phone’s screen is large enough to be seen from a distance. You may also need to adjust the zoom on your phone so that the image is not too large or too small.
Finally, you’ll need to have patience and be willing to experiment a bit in order to get the perfect image.
Some common methods to project mobile screen on wall without projector
Method 1: Use a Sheets of Paper or Aluminum Foil
One of the simplest ways to project your phone’s screen onto a wall is to use a sheet of paper or aluminum foil. Just hold the paper or foil up to the light coming from your phone’s screen, and position it so that the light is reflected onto the wall.
The quality of the image won’t be great, but this method is quick and easy.
Method 2: Use a magnifying glass
Another quick and easy way to project your phone’s screen is to use a magnifying glass. Just hold the glass up to your phone’s screen and position it so that the light is focused onto the wall.
Again, the quality of the image won’t be great, but this method is simple and doesn’t require any special equipment.
Method 3: Use a projector phone case
If you’re looking for a more permanent solution, you can purchase a projector phone case. These cases have a built-in projector that will allow you to project your phone’s screen onto any surface.
There are a variety of different projector phone cases available, so be sure to find one that is compatible with your phone.
In-depth turorial to create your DIY projector using magnifying lens and mirror
1. Choose the appropriate box and mirror
A magnifying lens and a mirror must be placed in the box. This arrangement allows light from your phone to produce a large projected image. More light has to reach the magnifying glass in order for the final picture to be brighter.
You’ll also need a long box so you can change the distance between your phone and the projecting lens. In general, the longer the box, the clearer the image will be.
2. Cover the interior for a higher image quality
The box’s sides are cut out with scissors or a precision knife, leaving one narrow side in a secure location. Also, the box’s lid should be cut. Here’s the issue: light reflection from the box walls produces image noise. As a result, the resulting picture will be low-res.
If you’re still experiencing this issue, one solution is to paint the inside of your projector black matte paper. You may do so by simply sticking the black matte paper to the interior walls of the projector.
It’s simple to spread the glue over the black matte paper. You may use a brush to do so. If you don’t have any black matte papers, you can paint the box instead.
3. Installing your lens on the DIY mobile projector
Remove the handle from your magnifying glass and trace its outline on the center of the narrow edge that was cut out. Cut out the outline with your precision knife so that the magnifying glass fits into the gap.
4. Create a manual, adjustable focus for your phone projector
An adjustable focus implies a lens that may be adjusted relative to the phone. To enhance the focus, you must build a second box that fits inside the outer box. Create four sheets of black paper folds and place them at the box’s edge after completing the second box.
Tip: Use a ruler to measure your dough.
Make shallow incisions in one edge and fold the flaps. Attach the neighboring sides of the flaps with glue. The structure is made more sturdy and rigid by this method. Next, glue the inner box’s lens on the flaps of the outer box.
5. Install the mirror in the cardboard phone projector mirror for diy projector
You currently have a setup that projects an image that is positioned left to right and then flips upside down. Deactivating your phone’s auto-rotate function to cure the latter is simple. After deactivating the option, you must flip your phone upside down.
The image positioning on the left to right can be correct via a mirror. You do so by placing the mirror at a 45-degree angle against the opposite edge of the lens.
6. Create a window for the phone
Using the screen size of your phone, draw a rectangle on the lid of your projector above the mirror. Using a precision knife, remove the rectangle that you drew.
Finally, insert the magnifying glass into the hole in step 3. Now you have a mobile projector. You may decorate it with paint or any other shiny substance to make it more interesting.
Where should I place my DIY projector for Projection ?
There is no one perfect placement for a DIY projector, as it will depend on the size of your phone’s screen and the focus of the magnifying glass or projector lens. Just experiment with different positions until you find one that works best for you.
Can I use a magnifying glass to project my phone’s screen onto a wall?
Yes, you can use a magnifying glass to project your phone’s screen onto a wall. Just hold the glass up to your phone’s screen and position it so that the light is focused onto the wall. Again, the quality of the image won’t be great, but this method is simple and doesn’t require any special equipment.
Is it important to lock my screen rotation ?
Yes, it is important to lock your screen rotation when you are projecting your phone’s screen onto a wall. If your screen rotates, the image will be projected at an angle and will be difficult to see. To lock your screen rotation, just go into your phone’s settings and disable the auto-rotate feature.
My image is projected upside down. How can I fix this ?
If your image is projected upside down, you’ll just need to adjust the orientation of your phone. To do this, go into your phone’s settings and find the “display” or “screen” option. From here, you should be able to change the orientation of your screen.
How do you make a homemade projector clearer ?
There are a few things you can do to make a homemade projector clearer. First, make sure that your phone’s screen is clean and free of fingerprints. Second, try adjusting the focus of the magnifying glass or projector lens. Finally, be sure to position your phone and the projector so that the light is shining directly onto the wall.
A phone projector is a great way to share photos and videos with friends and family. By following the steps in this article, you can easily make your own projector at home. Just remember to lock your screen rotation, adjust the focus, and position your phone and projector so that the light is shining directly onto the wall. With a little bit of effort, you’ll be able to project a clear image onto any surface.
I hope you enjoyed this article. If you have any questions or comments, please feel free to reach out to me. Thanks for reading!